|
If you have a need for a change to a piece of machinery, require a new
attachment to an existing machine or a whole new design for your application, we
have the staff available to consult with, discuss your needs, design and draw to
your specifications and then build the finished product.
Recent Design Examples
In addition to our range of equipment that we design and manufacture on our
Products Page
here a range of client one off designs recently completed.
- Skid Release on Freezing Works Chain This required a system
to release a single skid hook on an inclined rail so that only one hook was
available at a time for ease of collection by the operator thus speeding
up the chain process. Winton Engineering designed a system using a pneumatic
cylinder, pneumatic valves, proximity sensor operating a clamp and pin
arrangement to achieve the desired outcome for the client.
- Wool Press Transporter & Lifter This client required a
trailer to transport a 700KG wool press and then lift it to varying heights up
to 2.2 meters into shearing sheds. Winton Engineering designed a purpose built
trailer fitted with a platform raised by screw threads via a drive system
powered by an electric motor and controlled by limit switches and remote
control to easily and efficiently achieve the objective.
- Dairy Shed Molasses Feed Systems We have designed and
installed a range of dairy shed feed molasses systems for both rotary and
herringbone shed styles to meet the specific needs of our dairy farmer
clients.
- 8 Row Contractor Ridger An Agricultural Contractor
client requested we design and manufacture an 8 row ridger for the ridging of
swede crops in Southland that could be transported behind a tractor on the
road. This required the designing of a two wing fold up ridger with its
associated seed and manure delivery systems. Operated by hydraulic cylinders
and motors and associated electric control valves the full system can be
operated from the tractor cab.
- 6m Folding Roller & Air Seeder This again was a one of
design for a folding Cambridge type roller with 6 m working width. The folding
wings were designed to float up and down with the ground contour but also able
to oscillate up and down within the wing frame. An air seeder was fitted as
well to roll and seed the ground in a single pass.
| 
